The spigot (pictured) is included with every side-post umbrella and can be bolted directly onto a concrete slab or decking. Additional installation accessories provide the option of making the spigot removeable.

This non-permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.

Designed for use with the Aurora Cantilever Umbrella Cross Base, these pavers are made from moulded concrete and come in a set of 4. Each concrete block weighs 22kg and measures 500mm x 500mm.

Black powder-coated plate designed for use with sandbags, pegs or can be bolted into concrete or decking. The pipe has double-locking screws to secure the umbrella. To suit any umbrella post up to 40mm in diameter: Weight = 14kg, 500mm x 500mm base.

The inground sleeve is to be used for garden beds, lawn or any other soft surface or a paved area with sand/aggregate under the pavers. The hole will need to be a minimum of 40cm wide and 70cm deep and belled out at the bottom. Once the concrete is set approx 2-3 days (depending on weather conditions) you can install the umbrella to the sleeve.

The Barrel extension is used to raise a cantilever umbrella out of dirt, sand or tan bark so it doesn’t cause any damage to the rotating mechanism or just to give some extra height to the umbrella if needed. It is 300mm high and 215mm in diameter, and is black powder coated steel.
The Barrel extension is designed to be bolted to an in-ground sleeve or base plate.

The sleek aluminium cover hides 12 concrete pavers (measuring 400mm x 400mm). This non permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.

The wheel set is optional, so you can use this impressive base without them. This type of base is suitable for light to moderate winds only, (depending on umbrella size).

Please note the pavers are not included.

Concrete has been injected into moulded plastic to create this sleek light grey umbrella base. The base weighs in at 30kg and is 56cm in diameter. To suit any umbrella, post up to 40mm in diameter.